Overall Height
Interior Height 
Interior Width 
Exterior Aluminum
Wheels
Frame
Tag
Torsion Axles
Wall Construction
16" Centers
Flooring
Ceiling & Walls
Side Door
Side Door Construction
Ramp Door 
Spring Cover
Roof
Radius Corner
Electric
Tail Lights
Breakaway Kit
Fenders
Stoneguard
3rd Member
Grab Handles
DOT Tape
Back End
Coupler
Jack
Lift
Warranty

Vintage Stacker

The Vintage Stacker brings all the same frame structure as the Stacker Elite without all the extra options. Built upon 2 x 8 x 1/4" main rails and 1 x 2 tube side walls, the Vintage Stacker has the backbone to carry your precious cargo.
Some of the standard options on the Vintage Stacker include, .040" screwed exterior metal with matching colored screws, cast corners, brite anodized front wrap, 2 sets of LED tail lights, stoneguard, and a 13' hydraulic Stinger lift. The Vintage Stacker will be around for the long haul.

STACKER STANDARD EQUIPMENT:


                                                               

​​

Overall Height
Interior Height 
Interior Width 
Exterior Aluminum
Wheels
Frame
Tag
Torsion Axles
Wall Construction
16" Centers
Flooring
Ceiling
Walls
Side Door
Side Door Construction
Ramp Door 
Spring Cover
Roof
Insulation
Radius Corner
Electric
Tail Lights
Clearance Lights
Breakaway Kit
Fenders
Wheel Wells
Stoneguard
3rd Member
Grab Handles
Bottom Trim
Back End
Coupler
Jack
Lift
Stepwell
Warranty

Enclosed Stacker Trailer

13'4"
11 Feet (132")
96"
.050" Smooth Side w/ Riveted Seams
16" Radials with Aluminum Rims
Painted / Z-Tech Undercoating
2" x 8" x 1/4" Tube
Dexter E-Z Lube Axles - All Wheel Electric Brakes 
Mini Tapered Spread
82" Between Wheel Wells
1" x 2" Steel Tube
Walls, Ceiling & Floor
3/4" Plywood with Moisture Barrier
White Vinyl
.030" White Aluminum w/ White Screws
48" with Flush Lock and Deadbolt - Piano Hinge
Aluminum Tube
Spring Assist with Single Handle Recessed Latch
16" Wide Split Flap & ATP Transition Flap
Plastic Vac Form
1 Pc. Aluminum
Ceiling
Polished Cast Aluminum Corners & Brite Anodized Cap
Polish Cast Aluminum Back Caps
2 - 12V Chrome Lights w/ Switch, 12V Battery & Box
(4) L.E.D. in Uprights
All LED Including Turn Signals
Standard
Polished Aluminum Single Fenders
Covered in ATP
24" Aluminum Tread Plate
60" Triple Tube Tongue
(2) Standard on Ramp Door
4" with DOT Tape
Wrapped in Brite Anodized
25,000# Bolt On
Single Hydraulic Jack w/ Front & Rear Control Switches
16' Hydraulic Lift (12 Volt)
Covered in ATP
3 Year Factory Warranty

Vintage Stacker Elite

The Stacker Elite comes equipped with just the right amount of flash to the already unequaled quality that you have come to know and expect from Vintage Trailers. Built upon 2 x 8 x 1/4" main rails and 1 x 2 tube side walls, the Vintage Elite Stacker has the backbone to carry your precious cargo. The .050" aluminum exterior coupled with .030" aluminum interior metal walls shows everyone that this is not your normal everyday run of the mill stacker.
Completing the trailer with spread axles, aluminum wheels, polished fenders, polished cast corners, LED lighting, ATP covered wheel wells, 16' hydraulic lift and control switches for the hydraulic tongue jack at the inside of back door and at the jack really makes the Stacker Elite stand apart from the competition. 


STACKER STANDARD EQUIPMENT:


                                                               

​​

13'4"        
11 Feet (132")    
96"        
.040" Screwed Exterior Matching Screws(Wt/Blk Only)
16" Radials on Silver Spoke Rims
Painted / Z-Tech Undercoating
2" x 8" x 1/4" Tube    
Dexter E-Z Lube Axles - All Wheel Electric Brakes 
82" Between Wheel Wells
1" x 2" Steel Tube    
Walls, Ceiling & Floor
3/4" Plywood with Moisture Barrier
White Vinyl    
48" with Flush Lock and Deadbolt - Piano Hinge
Aluminum Tube    
Spring Assist with Cambars and 16" Flap
Plastic Vac Form    
1 Pc. Aluminum    
Front Cast Corners with Brite Anodized Top Wrap
2 - 12V Lights w/ Switch, 12V Battery & Box
(4) L.E.D. in Uprights
Standard        
Aluminum Teardrop with Turn Signals
24" Aluminum Tread Plate
60" Triple Tube Tongue
(2) Standard on Ramp Door
Included        
Wrapped in Mill Finish
25,000# Bolt On    
10,000# Crank Jack    
13' Hydraulic Lift (12 Volt)
3 Year Factory Warranty


​Racing Innovation For Racers, By Racers​
Phone: (574)522-2261